Friday, August 29, 2014

My new jewelry hangers.

I have been especially stressed out lately. I'm not typically a stressed person, but there have been a million things going on that are just out of my control. I'm not a control freak, but I like to know where things are headed. I have been planning on making some jewelry hangers for a while. When I get stressed I get extra productive. It worked out well in this case, because I now have some really cool jewelry hangers. We caught all the knobs on sale at Hobby Lobby for 50% off and spent about an hour picking them out. Husband wanted his own, kids wanted to pick out some... Yeah, it was a long process. But I loved what we wound up with. These are just some pictures of how I finished them.

Had to cut the right length of board.
I found some wood left by the previous owners of our house under the porch. It was perfect. As you can see, I didn't have any big saws or anything else out. Since we moved we don't have a workshop and it was easier to just cut it than to go to my MIL's to do it. I just decided what length I needed, cut it, and took it to my kitchen sink and washed it off.  Also, please don't judge me below. I was still in pajamas. It was just one of those days. :/ My daughter decided to snap some random pictures so I thought I'd use one.






I measuerd all mine 2.5 inches apart and left that same amount hanging off each end. It balanced nicely.

Drilling some holes.

Counter sunk holes.
I did stain and polyacrylic the fronts before I added the knobs, but most people want the really distressed look now. If that was what I wanted I wouldn't have done anything to it. These are the drilled holes with the knobs and nuts already screwed in. I didn't need the washers. I used 2 drill bits for these holes. I did the smaller part first with a 1/4 inch bit (I think). Drilled those all the way through, then put on a 1/2 inch bit and drilled about halfway through the wood. I did it slowly and had no problems at all. I have never done this before so I was surprised I didn't screw it up. It was easy.




Then my DH used a sawzall with a diamond blade and shaved off the extra length from the knobs. I could have done it, but he likes using the saw. It does look like a tiger stripe on the back of it but you can't tell anywhere else. We could have gotten the grinder out and the back would have been much prettier, but seriously, who's looking at the back when it's on my wall?

He's so helpful

You can't see the saw marks even from the top.
We wound up with something that made us both very happy. We each have our own. I was so happy with the way it came out. There are teeth type picture hangers on the back. One on each end. It sits almost flush with the wall. He loved all the weird knobs, especially the dog head. Too bad they didn't have any breed specific knobs. K9 officers have one track minds sometimes.

This is mine.










This is is TJs.
















And the first one I actually made was for my MIL's birthday. She has beachy stuff all over her house so we were able to find the perfect knobs for her. She loved it. Hers is going to have 2 screws attached to each corner and wire wrapped around them so that it will hang on the wall like string for a different look. Fits her house perfectly.

MIL's birthday present.

 So there you go. Fairly easy to make your own cute, custom jewelry hanger. I'm going to make an earring holder from the long cabinet and door handles at some point. Those are already bought and at home too, just haven't had time.

On a side note, if anyone see any knobs anywhere police related, please let me know! I think it would be awesome to have one to put in his office. I say jewelry holders, but it could be a coat rack during the winter as long as it's hung well.

post signature